| Date | Venue | Fee | |
|---|---|---|---|
| 21 Dec - 25 Dec 2026 | Dubai – UAE | $ 5,950 | Register Now |
| 31 May - 04 Jun 2027 | Dubai – UAE | $ 5,950 | Register Now |
| 13 Sep - 17 Sep 2027 | Dubai – UAE | $ 5,950 | Register Now |
| 20 Dec - 24 Dec 2027 | Dubai – UAE | $ 5,950 | Register Now |
About the Course
Wellhead and XMas tree systems provide critical pressure containment, production control and mechanical interfaces throughout the operational life of oil and gas wells. Increasing well complexity, high-pressure service conditions, corrosive fluids and ageing equipment place significant demands on component compatibility, valve reliability, sealing performance and field testing accuracy. Operational challenges such as sustained casing pressure, valve leakage, actuator malfunction, connector defects and deteriorating seals require systematic technical evaluation and timely intervention. Reliable wellhead performance depends on precise equipment configuration, disciplined operating procedures, effective pressure monitoring and the ability to distinguish equipment failures from downhole pressure communication.
This 5-day XMas Tree & Wellhead Operations and Testing training course develops the technical competencies required to evaluate, operate, test and troubleshoot surface wellhead and XMas tree assemblies. It examines casing and tubing suspension systems, mechanical connectors, valve configurations, pressure control mechanisms, equipment installation, commissioning and functional testing. Delegates will explore pressure test design, valve seat integrity, leak-path diagnosis, sustained annulus pressure investigation, actuator performance and equipment failure assessment. Particular attention is given to applicable API and ISO specifications, manufacturer requirements and established field operating practices. Through equipment configuration exercises, pressure calculations, test record interpretation and realistic fault scenarios, delegates will strengthen their ability to verify mechanical compatibility, identify pressure containment defects, evaluate equipment performance and support safe operational decisions throughout wellhead service activities.
Core Objectives
The delegates will achieve the following objectives:
- Differentiate surface wellhead and XMas tree configurations based on completion design, pressure ratings and operational requirements
- Verify mechanical compatibility across casing hangers, tubing hangers, connectors and pressure sealing interfaces
- Interpret valve operating sequences, choke behaviour, actuator functions and well isolation requirements
- Determine appropriate installation, commissioning and functional testing requirements for wellhead and XMas tree assemblies
- Establish pressure test boundaries, interpret pressure-time records and identify equipment leakage characteristics
- Diagnose sustained annulus pressure, valve malfunctions, sealing defects and abnormal pressure communication
- Formulate corrective measures and return-to-service recommendations based on equipment condition, test results and operational limitations
Training Approach
This training course will combine technical presentations with equipment configuration exercises, operational case studies, pressure testing calculations and field troubleshooting scenarios. Delegates will examine representative wellhead assemblies, XMas tree schematics, valve cross-sections, pressure ratings, seal arrangements and hydraulic control circuits. Practical activities will include equipment compatibility checks, pressure test boundary identification, valve function analysis, pressure-time record interpretation, annulus pressure calculations and leak-path investigations. Applicable API and ISO specifications, manufacturer procedures and established field testing practices will support technical discussions. Case studies involving valve leakage, sustained annulus pressure, actuator malfunction, pressure test failure and mechanical defects will reinforce diagnostic reasoning, operational judgement and equipment-specific technical decision-making.
The Attendees
This training course is designed for oil & gas professionals responsible for wellhead equipment operations, XMas tree installation, pressure testing, production control, maintenance and technical supervision.
A broad range of professionals will benefit, including but not limited to:
- Wellhead Engineers
- XMas Tree Equipment Engineers
- Completion Engineers
- Production Engineers
- Petroleum Engineers
- Well Intervention Engineers
- Wellhead Installation Supervisors
- Wellhead Maintenance Engineers
- Wellhead and XMas Tree Technicians
- Pressure Testing and Field Service Specialists
Daily Discussion
DAY ONE: WELLHEAD ENGINEERING AND MECHANICAL CONFIGURATION
- Wellhead System Designs and Completion Interfaces
- Casing Heads, Spools and Casing Hanger Assemblies
- Tubing Heads, Tubing Hangers and Suspension Mechanisms
- Wellhead Connectors, Flanges and Pressure Sealing Systems
- Equipment Pressure Ratings, Material Classes and Service Compatibility
- Wellhead Stack-Up Assessment and Mechanical Interface Verification
DAY TWO: XMAS TREE OPERATION AND PRESSURE CONTROL SYSTEMS
- XMas Tree Configurations and Production Flow Paths
- Master, Wing, Swab and Annulus Valve Functions
- Gate Valve Sealing Behaviour and Internal Pressure Communication
- Production Choke Operation and Flow Regulation
- Hydraulic Actuators, Control Circuits and Fail-Safe Functions
- Valve Operating Sequences and Pressure Isolation Logic
DAY THREE: WELLHEAD INSTALLATION, COMMISSIONING AND FUNCTIONAL TESTING
- Wellhead Assembly Preparation and Installation Sequence
- Tubing Hanger Landing, Lockdown and Seal Energisation
- XMas Tree Installation, Mechanical Alignment and Connection Integrity
- Valve Stroke Testing and Actuator Response Assessment
- Hydraulic Control System Testing and Emergency Closure Verification
- Commissioning Acceptance, Equipment Defects and Operational Handover
DAY FOUR: PRESSURE TESTING, ANNULUS PRESSURE AND LEAK DIAGNOSTICS
- Pressure Test Boundaries, Test Media and Equipment Limitations
- Wellhead Body, Connector and Seal Pressure Testing
- XMas Tree Valve Seat Leakage Testing and Acceptance Criteria
- Pressure-Time Test Interpretation and Leakage Assessment
- Sustained Annulus Pressure Diagnosis and Pressure Communication Analysis
- Test Failure Investigation, Corrective Measures and Retesting Decisions
DAY FIVE: WELLHEAD TROUBLESHOOTING AND EQUIPMENT RESTORATION
- Wellhead Equipment Failure Modes and Diagnostic Techniques
- Valve Sticking, Seat Damage and Internal Leakage Investigation
- Actuator Malfunctions and Hydraulic Control Fault Diagnosis
- Seal Deterioration, Connector Damage and Corrosion Assessment
- Equipment Repair, Component Replacement and Post-Maintenance Testing
- Integrated XMas Tree Failure Investigation and Return-to-Service Verification
Certificate Awarded
Upon successful completion of this training course, participants will be awarded a Certificate of Completion from XCalibre Training Centre, acknowledging their accomplishment. This certificate serves as a testament to their dedication to developing their skills and advancing their expertise in their respective fields.