| Date | Venue | Fee | |
|---|---|---|---|
| 07 Dec - 11 Dec 2026 | Dubai – UAE | $ 5,950 | Register Now |
| 20 Sep - 24 Sep 2027 | Dubai – UAE | $ 5,950 | Register Now |
| 06 Dec - 10 Dec 2027 | Dubai – UAE | $ 5,950 | Register Now |
About the Course
The transmission and distribution network relies on high-voltage substations to transform voltage levels, control power flows, enable switching operations and protect electrical equipment, ensuring the safe and reliable delivery of electrical power. As utilities expand transmission capacity, integrate renewable energy sources and modernise ageing infrastructure, the demand for technically sound substation design, equipment selection and commissioning continues to grow. Engineering deficiencies in busbar configurations, short-circuit ratings, insulation coordination, earthing systems or protection arrangements can result in equipment failures, operational disruptions and significant safety hazards. Utilities, engineering consultants and Engineering, Procurement and Construction (EPC) contractors require competent professionals who can translate design requirements into verified calculations, specify suitable equipment and validate installations through comprehensive testing before energisation.
This 5-day High Voltage Substation Design & Testing training course provides delegates with practical knowledge and technical methods for designing, specifying, evaluating and commissioning air-insulated (AIS) and gas-insulated (GIS) substations. It examines substation configurations, electrical layouts, short-circuit calculations in accordance with IEC 60909-0, primary equipment ratings under the IEC 60076, IEC 62271 and IEC 61869 series, and insulation coordination using IEC 60071. Delegates will also explore earthing grid design in accordance with IEEE Std 80, lightning shielding under IEEE Std 998, protection arrangements and IEC 61850-based substation automation. It also addresses factory and site acceptance testing, high-voltage withstand tests, partial discharge measurements and commissioning procedures. Through practical exercises and an integrated substation case study, delegates will strengthen their ability to verify design compliance, evaluate testing results and support safe energisation and reliable long-term substation operation.
Core Objectives
The delegates will achieve the following objectives:
- Select substation configurations and busbar arrangements based on reliability, maintenance and space requirements
- Calculate three-phase and single-phase short-circuit currents in accordance with IEC 60909-0 to determine equipment ratings
- Specify power transformers, switchgear, instrument transformers and surge arresters in accordance with applicable IEC standards
- Determine insulation levels and electrical clearances using IEC 60071 insulation coordination procedures and applicable installation requirements
- Design earthing grids in accordance with IEEE Std 80 touch and step voltage criteria and evaluate lightning shielding using IEEE Std 998
- Evaluate protection schemes and IEC 61850-based substation automation for transformers, transmission lines, busbars and circuit breakers
- Develop testing and commissioning plans covering high-voltage withstand tests, partial discharge measurements and protection system verification
Training Approach
This training course combines 65% practical applications and 35% technical instruction through expert-led presentations, guided engineering calculations, spreadsheet-based exercises and practical activities covering substation layout selection, short-circuit analysis, cable sizing, insulation coordination, earthing grid design, equipment specifications, protection relay settings and IEC 61850 configuration files. Through an integrated substation case study developed progressively over five days, delegates will evaluate equipment datasheets, review transformer, circuit breaker and GIS test reports against applicable acceptance criteria, and assess commissioning requirements while using engineering calculation templates, commissioning checklists and test acceptance reference sheets that can be adapted for workplace application.
The Attendees
This training course is designed for engineers and technical professionals involved in the design, specification, construction, testing, commissioning, operation and maintenance of high-voltage substations.
A broad range of professionals will benefit, including but not limited to:
- Substation Design and Electrical Engineers
- Protection and Control Engineers
- Testing and Commissioning Engineers
- Transmission and Distribution Planning Engineers
- Project and Site Engineers involved in Substation EPC Projects
- High-Voltage Equipment Asset and Maintenance Engineers
Daily Discussion
DAY ONE: SUBSTATION CONFIGURATIONS AND DESIGN BASIS
- Substation Types: Air-Insulated, Gas-Insulated and Hybrid
- Busbar Configurations: Single, Double, Breaker-and-a-Half and Ring
- Substation Design Basis, Single-Line Diagrams and Reliability Criteria
- Electrical Installation Requirements under IEC 61936-1
- Electrical Clearances, Safety Distances and Substation Layout
- Short-Circuit Current Calculations in accordance with IEC 60909-0
DAY TWO: PRIMARY EQUIPMENT SELECTION AND RATING
- Power Transformer Specification under the IEC 60076 Series
- Circuit Breakers and Disconnectors under the IEC 62271 Series
- Gas-Insulated Switchgear Design and Alternative Insulating Technologies under IEC 62271-203
- Current and Voltage Transformers under the IEC 61869 Series
- Busbar and Conductor Sizing for Thermal and Mechanical Short-Circuit Effects
- Surge Arresters and Reactive Power Compensation Equipment
DAY THREE: INSULATION COORDINATION, EARTHING AND LIGHTNING PROTECTION
- Insulation Coordination Procedures under IEC 60071-1 and IEC 60071-2
- Temporary, Switching and Lightning Overvoltages
- Earthing Grid Design in Accordance with IEEE Std 80
- Soil Resistivity Modelling and Step and Touch Voltage Limits
- Direct Lightning Stroke Shielding under IEEE Std 998
- Earthing Measurements and Lightning Shielding Verification
DAY FOUR: PROTECTION, CONTROL AND SUBSTATION AUTOMATION
- Protection Philosophy, Zones, and Primary and Backup Schemes
- Transformer Differential, Busbar and Circuit Breaker Failure Protection
- Transmission Line Distance Protection and Teleprotection Schemes
- Protection Relay Requirements under the IEC 60255 Series
- Substation Automation, Communication and Interoperability under IEC 61850
- Auxiliary AC and DC Supplies, Battery Systems and Control Cabling
DAY FIVE: TESTING, COMMISSIONING AND CONDITION ASSESSMENT
- Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT)
- High-Voltage Withstand Testing in accordance with IEC 60060-1
- Partial Discharge Measurements in accordance with IEC 60270
- Transformer Ratio, Winding Resistance, Power Factor and Frequency Response Tests
- Circuit Breaker Timing, Contact Resistance and Insulating Gas Quality Tests
- Secondary Injection Testing, IEC 61850 GOOSE Verification and Substation Energisation
Certificate Awarded
Upon successful completion of this training course, participants will be awarded a Certificate of Completion from XCalibre Training Centre, acknowledging their accomplishment. This certificate serves as a testament to their dedication to developing their skills and advancing their expertise in their respective fields.